11 types of circular saw blades and their uses [with pictures] (2023)

A circular saw is a multipurpose tool that can be used to cut different materials depending on the saw blade. You must choose the blades according to your type of work. What materials do you cut and what cuts do you need to make with a circular saw? That's what really matter!

There are different types of circular saw blades. Each type brings its specialty to a particular material, while some are considered versatile but have shortcomings.

Woodworkers, especially beginners and hobbyists, are advised never to choose all-purpose blades, as they are not considered the best for beginners and may not last long. Always choose specific blades for the material you are cutting with.circular saw.

11 types of circular saw blades

Enough explanations! Let's get back to the subject:What types of circular saw blades are there?and its use?

Standard circular saw blades

Serrated blades are the most used blades that you can find in everyday life, as they are used quite often by both experienced and novice people, both groups of woodworkers.

Blades with fewer teeth cut material very quickly, while blades with more teeth give the job a fine finish. More blade teeth mean a single tooth cuts less wood.

1. Reißmesser

These blades have fewer teeth, usually between 24 and 30.

This number can change with blade diameter as 10 inch blades have 40 to 50 teeth. Teeth spacing has been slightly increased to grind grains faster without crushing them. These blades are used to shred wood materials and also keep them clean.

2. The combo blade

These are utility knives used for cutting with or across the grain. Features combinations of five teeth separated by chokes, eliminating forest waste. These blades are mainly used for cutting hard, soft and plywood.

3. Plywood panels and sheets

It is mainly used for cutting thin materials as they are not strong enough to withstand the roughness of cutting instruments. For this reason, a special blade was developed to cut these materials smoothly. It can also be used for other sheet materials such as plastic and fiber. These leaves have a greater number of teeth, sometimes 100 or more.

4. Cross Knife

These blades are used to cut along the grain of the wood, for example to split long clumps in two without losing clean edges. This type of saw blade has many teeth (48 or more), leaving a small space between each tooth, which keeps the edges of the wood clean and smooth.

5. Hohle Erdblätter

The healthiest member of the Blade family. Its composition is slightly different from other types of blades. This blade has a thicker body profile compared to its teeth, which really prevents jamming and allows the blade to cut through material quite smoothly.

6. Fine-cut saw blades

This blade comes with 3/32 inch wider carbide teeth. This fineness keeps the wood intact and cuts it precisely. These blades ensure less clutter in the work area and also limit material waste.

Thin-cutting blades help with light saws because each tooth on the blade picks up smaller pieces of wood, reducing work on the engine.

7. Segmented Blades

These blades have diamond edges, but their edge is divided by large cavities like bowl-shaped ground blades. Segments coarsely cut materials. It is often used when speed is more important than a clean finish. These blades fall into two categories, one suitable for dry cutting, while the other is set up for wet cutting only. It has the ability to cut through hard materials such as concrete and ceramics.

Unconventional circular saw blades

The mentioned blades are multifunctional blades. You can cut any material such as wood, plastic and other light sheet metal. Choose the blade you want wisely, understanding the nature of your job and also evaluating the working capabilities of your circular saw. We will discuss this later in this article.toothless bladesthat are prepared for specific materials such as glass, heavy metal strips and ceramic tiles

8. Abrasive sheets

These are raw sheets of aluminum oxide. It uses friction to cut heavy metals like steel and iron. Used specifically for circular saws and often for angle grinders, abrasive sheets have high performance and destructive behavior for heavy metals.

9. And Lâmina Turbo Edge

Much like grinding blades but with a slight difference in posture as these blades have serrated edges. It is used to cut hard materials such as bricks and ceramic tiles. Some of them only work for dry cuts and others are suitable for both dry and wet cuts. Turbo blades do not provide cleaner finishes, but they are more aggressive when compared to abrasives.

10. Continuous Edge Blades

These blades are also called diamond blades. Designed for cutting materials such as glass and ceramics, the diamond tips are on the edges of the full-edge blade, which cuts materials very smoothly and provides the cleanest finish of any member of the family.

11. Stacked data sheets

These are sets of saw blades that comprise two types of saw blades such as the chipper and the shim, commonly used to make grooves in pieces of wood of different dimensions. These blades are designed for that.table sawsOnly.

Diploma

The benefit to the user is based on the saw blade and circular saw. Not everything can work correctly, as some circular saws are not familiar with certain types of saw blades, even if everything goes well, the risk of loss or accident is minimal.

givensecurity top priorityand users as a whole must be careful, which means that all items must be handled properly according to the nature of the work for the purpose of combined efficiency and protection of work.